Achievements

  • Prediction of Fatigue Life of Boom Nose End Casting using Linear Elastic Fracture Mechanics, Nitin D. Ghongade, R.M. Metkar Subhash Hiwase, International Journal of Engineering Research and Application (IJERA),  volume 4, Issue 8(Version 2) (2014), pp. 108-111
  • Fixture design for tacking and welding of loadall inner boom and Jib Head: A Review, A.M.Mhaske, R.M.Metkar, Ajay Kumar Singh, Subhash D Hiwase, International Journal of Mechanical Engineering Research (IJMER), volume 3 ,(2014) ,issue 1, pp 1-5.
  • Optimization of Gating System Using Mould Flow Software: a Review, N.A.Dukare, R.M. Metkar, N.A. Vidhate, S.D.Hiwase, International Journal of Mechanical Engineering (IJME), Volume 4 Issue 1 (2014), pp 8-14
  • A Fatigue Analysis and Life Estimation of Boom Nose End Casting: A Review, Nitin D. Ghongade, R.M. Metkar Subhash Hiwase, International Journal of Mechanical Engineering Research (IJMER),  volume 4, Number 1 (2014), pp. 67-74
  • An approach to guesstimate the fatigue life of an industrial shaft using stress life and strain life assessment techniques, Rajesh Metkar, Vivek Sunnapwar, Subhash Hiwase, ASME Mechanical Engineering Congress & Exposition (IMECE), 2014.
  • Assessment of an industrial shaft for its fatigue strength and life estimation using strain life evaluation technique,  Rajesh Metkar, Vivek Sunnapwar, Subhash Hiwase, International Journal of Mechanical & Materials Engineering (IJMME), SPRINGER Publisher, (2013).
  • Fatigue Strength and Life Prediction of Forged Steel Crankshaft by using Fracture Mechanics Approach, Rajesh Metkar, Vivek Sunnapwar, Subhash Hiwase, (2013), SAE Technical Paper, 2013-26-0141, doi:10.4271/2013-26-0141.
  • Fatigue Strength and Life Prediction of Forged Steel Crankshaft by using Fracture Mechanics Approach, Rajesh Metkar, Vivek Sunnapwar, Subhash Hiwase, SAE Paper No. 2013-026-141, Symposium on International Automotive Technology (SIAT) organized by ARAI Pune, Proceeding by SAE International USA, 9-11 January 2013.
  • Evaluation of FEM based fracture mechanics technique to estimate life of an automotive forged steel crankshaft of a single cylinder diesel engine, Rajesh Metkar, Vivek Sunnapwar, Subhash Hiwase, Vidya Sagar Anki, Mahendra Dumpa, (2013),  Journal of Procedia Engineering, ELSEVIER, Vol 51 (2013), pp 567-572. Doi:10.1016/j.proeng.2013.01.080.
  • Multidimensional modeling of direct injection diesel engine with multiple stage fuel injections, Subhash Hiwase, S Moorthy, Hari Prasad, Mahendra Dumpa, Rajesh Metkar, (2013), Journal of Procedia Engineering, ELSEVIER, Vol 51 (2013), pp 670-675. Doi:10.1016/j.proeng. 2013.01.095.
  • A Fatigue Analysis and Life Estimation of Crankshaft- A review, Rajesh Metkar, Vivek Sunnapwar, Subhash Hiwase, (2011), International Journal of Mechanical & Materials Engineering, (IJMME), SPRINGER UK, Vol 6, No 3, PP 425-430.
  • Modal Analysis for High Cycle Fatigue Life Estimation of Crankshaft, Rajesh Metkar, Vivek Sunnapwar, Subhash Hiwase, (2011), International Journal of Applied Engineering Research, (IJAER), Volume 6, Number 21 (2011) pp. 2485-2490, ISSN 0973-4562.
  • Prediction of Fatigue Failure in Engineering Component by using Critical Distance Approach, Rajesh Metkar, Vivek Sunnapwar, Subhash Hiwase, (2011), International Review of Mechanical Engineering (I.RE.M.E.), November 2011, Vol. 05, N.7, pp 1254-1257, ISSN:1970 – 8734.
  • Comparative Evaluation of Fatigue Assessment Techniques on a Forged Steel Crankshaft of a Single Cylinder Diesel Engine, Rajesh Metkar, Vivek Sunnapwar, Subhash Hiwase, ASME 2012 International Mechanical Engineering Congress & Exposition, Houston, Texas, USA- November 20-22 2012. Volume 3, Paper No. IMECE2012-85493, pp. 601-609; doi: 10.1115/IMECE2012-85493.
  • Comparative Evaluation of Fatigue Assessment Techniques on a Forged Steel Crankshaft of a Single Cylinder Diesel Engine, Rajesh Metkar, Vivek Sunnapwar, Subhash Deo Hiwase, Proceedings of the ASME 2012, International Mechanical Engineering Congress & Exposition IMECE2012, IMECE2012-85493, November 9-15, 2012, Houston, Texas, USA.
  • Evaluation of FEM based fracture mechanics technique to estimate life of an automotive forged steel crankshaft of a single cylinder diesel engine, Rajesh Metkar, Vivek Sunnapwar, Subhash Hiwase, 3rd, Nirma University, International Conference on Engineering, (NUiCONE 2012), 6-8 December 2012, Published by ELSEVIER, Procedia Engineering.
  • Multidimensional modeling of direct injection diesel engine with multiple stage fuel injections,  Rajesh Metkar, Vivek Sunnapwar, Subhash Hiwase, 3rd, Nirma University, International Conference on Engineering, (NUiCONE 2012), 6-8 December 2012, Published by ELSEVIER, Procedia Engineering.
  • Fatigue life prediction of IC engine crankshaft: a comparison between the stress life and strain life approach, Rajesh M. Metkar, Vivek K. Sunnapwar, Subhash Deo Hiwase, Vidya Sagar Anki, Mahendra Dumpa, Front. Mech. Eng., Higher Education Press and SPRINGER-Verlag Berlin Heidelberg 2011.
  • Assessment of fatigue life of an industrial plate using stress life and strain life estimation technique, Rajesh M. Metkar, Vivek K. Sunnapwar, Subhash Deo Hiwase, Vidya Sagar Anki, Mahendra Dumpa, Int. J. Computer Aided Engineering and Technology (IJCAET), Vol. x, No. x, xxxx.
  • Assessment of an Industrial Shaft for its Fatigue Strength and Life Estimation Using Strain Life Evaluation Technique, Rajesh M. Metkar, Vivek K. Sunnapwar, Subhash Deo Hiwase, Jalgam Ravinder Rao, Vidya Sagar Anki, International Journal of Mechanical and Materials Engineering (IJMME).
  • Forge Steel Automotive Crankshaft Fatigue Life Estimation and Comparison using Stress and Strain life Assessment Techniques, Rajesh M. Metkar, Vivek K. Sunnapwar, Subhash Deo Hiwase, Jalgam Ravinder Rao, Mahindra Dumpa, Journal of the Brazilian Society of Mechanical Sciences and Engineering.
  • Forge Steel Automotive Crankshaft Fatigue Life Estimation and Comparison using Stress and Strain life Assessment Techniques, Rajesh M. Metkar, Vivek K. Sunnapwar, Subhash Deo Hiwase, Iranian Journal of Science and Technology (IJST)-Transaction B: Engineering, 2013.
  • A Fundamental Study of an Industrial Shaft For its Fatigue Life Estimation Using Stress Life Assessment Technique, Rajesh M. Metkar, Vivek K. Sunnapwar, Subhash Deo Hiwase, Jalgam Ravinder Rao, Vidya Sagar Anki, The Archive of Mechanical Engineering.
  • A Fundamental Study Of An Industrial Shaft For Its Fatigue Life Estimation Using Stress Life Assessment Technique, Rajesh M. Metkar, Vivek K. Sunnapwar, Subhash Deo Hiwase, International Journal for Engineering, Sciences and Management, 2013.
  • Fatigue Life Estimation of Shaft by using Linear Elastic Fracture Mechanics, Rajesh M. Metkar, Vivek K. Sunnapwar, Subhash Deo Hiwase, International Journal of Mechanical & Aerospace Engineering, (IJMAE), World Academy of Science, Engineering & Technology, USA.
  • Modeling of In-Cylinder Processes in Direct Injection Diesel Engine with Multiple Stage Split Fuel Injections, Subhash Deo Hiwase, S. Moorthy, Hari Prasad, Mahendra Dumpa, Rajesh M. Metkar, ASME 2013 Summer Heat Transfer Conference, July 14-19, 2013, Minneapolis, MN.
  • The Recent Emerging Trends in IC Engine Combustion Modelling, Subhash Deo Hiwase, S. Moorthy, Hari Prasad, Mahendra Dumpa, Rajesh M. Metkar, 9th-12th January 2013, SIAT, India, Will be published in SAE International (Accepted), SAE-2012-26-0514.
  • Fatigue strength and Life Prediction of Forged Steel Crankshaft by using Fracture Mechanics Techniques, Rajesh M. Metkar, Vivek K. Sunnapwar, Subhash Deo Hiwase, Symposium on International Automotive Technology 2013, SAE International, Paper No. 2013-26-0141.
  • Fatigue strength and Life Prediction of Forged Steel Crankshaft by using Fracture Mechanics Techniques, Rajesh M. Metkar, Vivek K. Sunnapwar, Subhash Deo Hiwase, 9th -12th January 2013, SIAT, India, Paper No. SAE-2012-26-0043.
  • Evaluation of FEM based fracture mechanics technique to estimate life of an automotive forged steel crankshaft of a single cylinder diesel engine, Rajesh M. Metkar, Vivek K. Sunnapwar, Subhash Deo Hiwase, Vidya Sagar Anki, Mahendra Dumpa, 3rd Nirma University International Conference on Engineering (NUiCONE 2012), will be published in Procedia Engineering (2012), ELSEVIER.
  • Multidimensional Modeling of Direct Injection Diesel Engine with Multiple Stage Fuel Injections, Subhash Deo Hiwase, S. Moorthy, Hari Prasad, Mahendra Dumpa, Rajesh M. Metkar, 3rd Nirma University International Conference on Engineering (NUiCONE 2012), will be published in Procedia Engineering (2012), ELSEVIER.
  • Comparative Evaluation of Fatigue Assessment Techniques on a Forged Steel Crankshaft of a Single Cylinder Diesel Engine, Rajesh Metkar, Vivek Sunnapwar, Subhash Deo Hiwase, Proceedings of the ASME 2012, International Mechanical Engineering Congress & Exposition IMECE2012, IMECE2012-85493, November 9-15, 2012, Houston, Texas, USA.
  • Fatique analysis and life estimation of crankshaft – A review, Rajesh Metkar, Vivek Sunnapwar, Subhash Deo Hiwase, International Journal of Mechanical and Materials Engineering, (IJMME), Vol.6 (2011), No.3, pp. 425-430, ISSN 1823-0334, Indexed by Scopus.
  • Modal Analysis for high cycle fatique life estimation of crankshaft, Rajesh Metkar, Vivek Sunnapwar, Subhash Deo Hiwase, International Journal of Applied Engineering Research, ISSN 0973-4562, Volume 6, Number 21 (2011) pp. 2485-2490.
  • Prediction of Fatigue Failure in Engineering Component by using Critical Distance Approach, Rajesh Metkar, Vivek Sunnapwar, Subhash Deo Hiwase, International Review of Mechanical Engineering (I.RE.M.E.), November 2011, Vol. 05, n. 7, pp 1254-1257, ISSN:1970-8734.
  • Entropy Balance and Exergy Analysis of Droplet Combustion and Modeling of In-Cylinder Processes in a Reciprocating Four Stroke Direct Combustion Diesel Engine, S.D.Hiwase, Ph.D. Thesis, IIT, Kharagpur, India.
  • Entropy Balance and Exergy Analysis of the Process of Droplet Combustion, S.D.Hiwase, A.Dutta, S.K.Som, Journal of Physics D: Applied Physics 31 (1998) 1601-1610, Printed in UK.
  • Entropy Balance and Exergy Analysis of the Process of Droplet Combustion, S.D.Hiwase, A.Dutta, S.K.Som, ISHMT-ASME, Heat and Mass Transfer Conference, 1997, IIT Kanpur, India.
  • IC Engine combustion Modeling Methodology and Practice, Dr. Subhash Deo Hiwase, XVII National Conference on I.C. Engines and Combustion, Dec 2001, NIT, Surathkal, India.
  • The Recent CFD Meshing Techniques in Aerospace Engineering, Dr. Subhash Deo Hiwase, Annual Computational Fluid Dynamics (CFD) Symposium, 2002, GTRE, Bangalore, India.
  • The use of Computational Fluid Mechanics Technology in Automotive Industry, Dr. Subhash Deo Hiwase, One Day National Workshop on Emerging Trends in Information Technology in Automotive Industry, October 24, 2002, SAE India, IIT Chennai, India.
  • Recent Advances in CFD Modeling of an IC Engine, Dr. Subhash Deo Hiwase, In house Toptech Program on Diesel Engine Technology for CVRDE Engineers and Scientists, December, 2-6, 2002, SAE India, Southern India Section, CVRDE, Chennai, India.
  • External Aerodynamic Study of a Wing Structure, Dr. Subhash Deo Hiwase, Annual Computational Fluid Dynamics (CFD) Symposium, 2003, IISc Bangalore, India.
  • An Overview on V2F Turbulence model, Dr. Subhash Deo Hiwase, 2003, Lecture at Mechanical Engineering Department, IIT Chennai.
  • CFD Simulation of Calendria Flow and Temperature Distribution Inside Nuclear Reactor, Dr. Subhash Deo Hiwase et. al., 30th National Conference on Fluid Mechanics and Fluid Power, December 11-13, 2003, NIT Surathkal, India.
  • Three-Dimensional Numerical Simulation of the Flow Inside a Model Can -Type Gas Turbine Combustor by using STAR-CD, Dr. Subhash Deo Hiwase et. al., 18th National & 7th ISHMT-ASME, Heat and Mass Transfer Conference, January 4 – 6, 2006, IIT Guwahati, India.
  • Optimization of Foot Rest Assembly of a Three-Wheeler Automobile, Dr. Subhash Deo Hiwase et. al., International Conference on Recent Developments in Structural Engineering (RDSE – 2007), 30, 31 August and 01 September 2007, Manipal Institute of Technology, Manipal – 576 104, Karnataka, India.
  • FEA Analysis on Calibration and Performance of Non-Linear Elastomer Engine Mounts, Dr. Subhash Deo Hiwase et. al., International Conference on Recent Developments in Structural Engineering (RDSE–2007), 30, 31 August and 01 September 2007, Manipal Institute of Technology, Manipal–576 104, Karnataka, India.
  • Development of 395 CC DI Diesel Engine to meet proposed BS-III Emission norms, Dr. Subhash Deo Hiwase et. al., International Conference & XX National Conference on I.C. Engines and Combustion, December 6-9, 2007, JNTU Hyderabad, India.
  • CNG – Gasoline Bi-Fuel Air Cooled Engine Development for Compliance with Proposed Bharat Stage -III Norms, Dr. Subhash Deo Hiwase et. al., International Conference & XX National Conference on I.C. Engines and Combustion, December 6-9, 2007, JNTU Hyderabad, India.
  • Multidimensional Modeling of Direct Injection Diesel Engine with Multiple Injections, Dr. Subhash Deo Hiwase et. al., International Conference & XX National Conference on I.C. Engines and Combustion, December 6-9, 2007, JNTU Hyderabad, India.
  • Modeling of In-Cylinder Processes in a DI Diesel Engine and Study of Influence of Operating Parameters on Performance and Emission Characteristics, Dr. Subhash Deo Hiwase et. al., International Conference & XX National Conference on I.C. Engines and Combustion, December 6-9, 2007, JNTU Hyderabad, India.
  • Comparative Study of Turbulence Models in a Gas Turbine Combustor by using Fluent, Dr. Subhash Deo Hiwase et. al., 19th National & 8th ISHMT-ASME, Heat and Mass Transfer Conference, January 3 – 5, 2008, JNTU College of Engineering, Hyderabad, India.
  • A Study of Gas-Solid Heat transfer in Cyclone Heat Exchanger by using CFD, Dr. Subhash Deo Hiwase et. al., 19th National & 8th ISHMT-ASME, Heat and Mass Transfer Conference, January 3 – 5, 2008, JNTU College of Engineering, Hyderabad, India.
  • Recent Trends in IC Engine Combustion Modeling, Dr. Subhash Deo Hiwase, A three day National Workshop on Emerging Trends in Automobile Engineering, 03-05 July 2008 at NIT Warangal.
  • Business Plan on Engineering Services Company in India – A complete business plan for opening an Engineering Services Company in India, including the timeline and financials by Dr. Subhash Deo Hiwase, Published on net.
  • Indian Scenario of Engineering Services Outsourcing (ESO) Business in India – A study on the potential of outsourcing engineering services to India, Dr. Subhash Deo Hiwase, Published on net.
  • Applications of Product Life Cycle management Technique and Procedures in a New Product Development Environment, Dr. Subhash Deo Hiwase, National Seminar Cum Exposition on New Product Development, Confederation of Indian Industry, CII-CFM, 16-17 Sep 2010, Hotel Fortune, Hyderabad, India.
  • PLM Based Automotive Engineering Simulations, Dr. Subhash Deo Hiwase, National Conference on Recent Trends in Mechanical Engineering, 4-5 November 2011, Gyan Ganga Institute of technology and Management, Bhopal, India.
  • Genesis of Fluid Mechanics and Computational Fluid Mechanics, Faculty Development Program on “ALTERNATE FUELS FOR IC ENGINES”, 12-15 March 2012, Organized by Department of Mechanical Engineering Poojya Doddappa Appa College of Engineering (An Autonomous Institution Approved by AICTE, Accredited by NBA & Affiliated to VTU Belguaum, Gulbarga, Karnataka, Supported & canalized by Vision Group on Science & Technology, Government of Karnataka, Bangalore & Vishvesvaraya Technological University, Belgaum.
  • Recent Trends in IC Engine Combustion Modeling, Faculty Development Program on “ALTERNATE FUELS FOR IC ENGINES”, 12-15 March 2012, Organized by Department of Mechanical Engineering Poojya Doddappa Appa College of Engineering (An Autonomous Institution Approved by AICTE, Accredited by NBA & Affiliated to VTU Belguaum, Gulbarga, Karnataka, Supported & canalized by Vision Group on Science & Technology, Government of Karnataka, Bangalore & Vishvesvaraya Technological University, Belgaum.
  • An Overview on Axis and its Engineering Services Offerings – People, Process and Projects, 4th Annual TPO Conference, 9th June 2012, Rangrut.com, Hyderabad, http://rangrut.com/tpo-conference-hyderabad/speakers.php.
  • Automotive Product Life Cycle Management Trends and Practices, 31st July 2012, An Expert Technical Talk as a Chief Guest at Inaugural Function of Association of Mechanical Engineers (ASME & SAE Student Section), Vignan Institute of Technology & Science, Hyderabad, India.
  • Aeronautical Engineering – A way towards Future, 16-17 August 2012, An Inaugural Talk as a Chief Guest at Technical Fest–Vignan’s Praudhyogiki-2K12, Vignan’s Institute of Technology & Aeronautical Engineering, Hyderabad, India.
  • Aero and Auto Modeling Methodologies, 21-22 September 2012, Mentoring of Aero Club Vignan at Technical Fest–Vignite-12, Vignan’s Institute of Technology & Aeronautical Engineering, Hyderabad, India.
  • Aero modelling show, 30-08-2013, Demonstration of the Flight of Aero-model at Sreenidhi Institute of Science and Technology at Roboveda-13, Sreenidhi Institute of Science and Technology, Hyderabad, India.
  • Aero and Auto Modeling Methodologies, 23-01-2014, Mentoring of Aero and Auto Club at Technical Fest, SR Engineering College, Warangal, India.
  • Aero and Auto Modeling Methodologies, 31-01-2014, Mentoring of Aero and Auto Club at Technical Fest, Sagar Institute of Science and Technology, Hyderabad, India.

 

 

 

LATEST NEWS